Faucet Installation in Kennedale
TD Plumbing Solutions handles faucet installation in Kennedale, TX, about 13 miles east of our Benbrook base, with Texas Master Plumber Terrill Dobbs doing the work himself.
- 24/7 Emergency Service
- Texas Master Plumber RMP 45333
- Serving Benbrook Since 2005
- Financing Through Hearth
Kennedale is about 13 miles east of our Benbrook base. The drive is about 20 to 30 minutes, usually by I-20 east. We work all over Kennedale, including Village Creek and Hudson Village Creek. You talk to a real person when you call, and Terrill gives you the price before any work starts.
Signs It's Time for Faucet Installation
Not sure your new faucet fits your sink? Call and a real person will help. Call (817) 229-9450 · Available 24/7 for emergencies
How Long It Takes
| Job | Typical time |
|---|---|
| Kitchen or bath faucet swap | About 1 to 2 hoursLonger if valves or hoses need replacing. |
| Outdoor faucet replacement | About 1 to 3 hoursDepends on the wall and how easy the pipe is to reach. |
Typical ranges, not promises. Travel time from our Benbrook base: about 20 to 30 minutes.
Faucet Installation in Kennedale Homes
Hard water in Kennedale shortens faucet life, so a new faucet is often part of a kitchen or bath refresh. Terrill installs it, checks the shutoff valves and supply lines, and pursues the manufacturer warranty on parts he installs. You get the price first.
Where We Work in Kennedale
- Village Creek
- Hudson Village Creek
- Shady Creek
- Oak Crest
- Falcon Wood Estates
- Kennedale Parkway area
How Faucet Installation Works With TD
- 1
Look and price it
Terrill checks your sink, valves and hoses, then gives you the price.
- 2
Shut off and remove
We close the valves, take out the old faucet and clean old putty and scale off the sink.
- 3
Set and connect
The new faucet goes in square and tight. Worn valves or hoses are swapped now, not next year.
Faucet Installation in Kennedale?
You get the fix and the price before any work starts.
What Affects the Price in Kennedale
| Type of faucet | A basic swap costs less than a pull-down or touchless model. |
|---|---|
| Valves and hoses | Stuck shutoff valves or old hoses add parts and time. |
| Distance to Kennedale | About 13 miles east of our Benbrook base, by I-20 east. |
Price before work starts. Hearth financing on larger jobs.
Faucet Installation Questions From Kennedale
If they are old, stiff or crusted with scale, it is a good time to do it. A valve that will not close can turn a small job into a flood. Terrill checks yours in your Kennedale home and tells you honestly if they are fine to keep.
It depends on the schedule and how urgent it is. Emergencies are answered 24/7 by a real person. Planned work is booked at a time that suits you, and we give you an honest arrival time when you call.
Often, yes. Old braided or rubber hoses can wear and burst without warning. If yours look worn, kinked or rusty at the ends, we replace them during the install. It costs far less now than a leak under the sink later.
More Plumbing in Kennedale
See our faucet installation service, our plumber in Kennedale page or contact us.
Call TD for Faucet Installation in Kennedale
A real person answers, day or night.